From 1008d2f3040136967dc08d621479e680d13de32a Mon Sep 17 00:00:00 2001 From: Alan Hicks Date: Sat, 24 Apr 2010 02:15:18 -0400 Subject: Kernel compilation complete. --- chapter_18.xml | 251 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 250 insertions(+), 1 deletion(-) (limited to 'chapter_18.xml') diff --git a/chapter_18.xml b/chapter_18.xml index 8f7b8a8..bc49aed 100644 --- a/chapter_18.xml +++ b/chapter_18.xml @@ -122,7 +122,256 @@ However, some users may need to compile a kernel. If your computer contains bleeding edge hardware, a newer kernel may offer improved support. Sometimes a kernel patch my be available that corrects a problem you are experiencing. In these cases a kernel compile is -probably warranted. +probably warranted. Users who simply want the latest and greatest +version or who believe using a custom compiled kernel will give them +greater performance can certainly upgrade, but are unlikely to notice +any major changes. If you still think compiling your own kernel is +something you want or need to do, this section should walk you through +the many steps. +Compiling and installing a kernel is not that difficult, but there are +a number of mistakes that can be made along the way, many of which can +prevent your computer from booting and cause major frustration. + + + +The first step is ensuring you have the kernel source code installed on +your system. The kernel source package is included in the "k" disk set +in the Slackware installer, or you can download another version from +http://www.kernel.org/. +Traditionally, the kernel source is located in +/usr/src/linux, a symbolic link that points to the +specific kernel release used, but this is by no means set in stone. You +can place the kernel source code virtually anywhere without +encountering any problems. + + +darkstar:~# ls -l /usr/src +lrwxrwxrwx 1 root root 14 2009-07-22 19:59 linux -> linux-2.6.29.6/ +drwxr-xr-x 23 root root 4096 2010-03-17 19:00 linux-2.6.29.6/ + + + +The most difficult part of any kernel compile is the kernel +configuration. There are hundreds of options, many of which can +optionally be compiled into modules. This means there are thousands of +ways to configure a kernel. Fortunately, there are a few handy tricks +that can keep you from running into too much trouble. The kernel +configuration file is .config. If you are very +brave, you can manually edit this file with a text editor, but I highly +recommend you use the kernel's built-in tools for manipulating +.config. + + + +Unless you are very familiar with configuring kernels, you should +always start with a solid base configuration and modify it. This +prevents you from skipping an important option that might force you to +compile the kernel again and again until you get it right. The best +kernel .config files to start with are those used +by Slackware's default kernels. You can find them on your Slackware +install disks or at your favorite mirror in the +kernels/ directory. + + +darkstar:~# mount /mnt/cdrom +darkstar:~# cd /mnt/cdrom/kernels +darkstar:/mnt/cdrom/kernels# ls +VERSIONS.TXT huge.s/ generic.s/ speakup.s/ +darkstar:/mnt/cdrom/kernels# ls genric.s +System.map.gz bzImage config + + + +You can replace the default .config file easily by +copying or downloading the config file for the +kernel you wish to use as a base. Here I am using Slackware's +recommended generic.s kernel for a base, but you may wish to use the +huge.s config file. The generic kernel builds more things as modules +and thus creates a smaller kernel image, but it usually requires the +use of an initrd. + + +darkstar:/mnt/cdrom/kernels# cp generic.s/config /usr/src/linux/.config + + + +The Slackware kernel file lacks the "dot" while the kernel +file includes it. If you forget, or simply copy the +config to /usr/src whatever +.config file was already present will be used +instead. + + + +If you want to use the configuration for the currently running kernel +as your base, you may be able to locate it at +/proc/config.gz. This is a special kernel-related +file that includes the entire kernel configuration in a compressed +format and requires that your kernel was built to support it. + + +darkstar:~# zcat /proc/config.gz > /usr/src/linux/.config + + + +Now that we've created a solid base configuration, it's time to make +any configuration changes we want. The entire kernel build process from +configuration to compilation is performed with the +make(1) command and special arguments to it. +Each argument performs a different function. + + + +If you are upgrading to a newer kernel release, you will definitely +want to use the oldconfig argument. This will step through +your base .config and look for missing elements +that usually indicates that the new kernel release contains additional +options. Since options are added at virtually every kernel release, +this is generally a good thing to do. + + +darkstar:/usr/src/linux# make oldconfig +scripts/kconfig/conf -o arch/x86/Kconfig +* +* Restart config... +* +* +* File systems +* +Second extended fs support (EXT2_FS) [M/n/y/?] m + Ext2 extended attributes (EXT2_FS_XATTR) [N/y/?] n + Ext2 execute in place support (EXT2_FS_XIP) [N/y/?] n +Ext3 journalling file system support (EXT3_FS) [M/n/y/?] m + Ext3 extended attributes (EXT3_FS_XATTR) [Y/n/?] y + Ext3 POSIX Access Control Lists (EXT3_FS_POSIX_ACL) [Y/n/?] y + Ext3 Security Labels (EXT3_FS_SECURITY) [Y/n/?] y +The Extended 4 (ext4) filesystem (EXT4_FS) [N/m/y/?] (NEW) m + + + +Here you can see that I the new kernel I am compiling has added support +for a new filesystem: ext4. oldconfig has gone through my +original configuration, kept all the old options exactly as they were +set, and prompted me on what to do with new options. Typically it is +save to choose the default option, but you may wish change this. +oldconfig is a very handy tool for presenting you with only +new configuration options, making it ideal for users who simply have to +try out the latest kernel release. + + + +For more serious configuration tasks, there are a multitude of options. +The linux kernel can be configured in three primary ways. The first is +config, which will step through each and every option one by +one and ask what you would like to do. This is so tedious that hardly +anyone ever uses it anymore. + + +darkstar:/usr/src/linux# make config +scripts/kconfig/conf arch/x86/Kconfig +* +* Linux Kernel Configuration +* +* +* General setup +* +Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] Y +Local version - append to kernel release (LOCALVERSION) [] -test +Automatically append version information to the version string (LOCALVERSION_AUTO) [N/y/?] n +Support for paging of anonymous memory (swap) (SWAP) [Y/n/?] + + + +Fortunately, there are two much easier ways to configure your kernel, +menuconfig and xconfig. Both of these create a +menu-driven program that lets you select and de-select options without +having to step through each one. menuconfig is the most +commonly used method, and the one I recommend. xconfig is +only useful if you are attempting to compile the kernel from a +graphical user interface within X. Both are +so similar however, that we are only going to document +menuconfig. + + + +Running make menuconfig from a terminal will +present you with the friendly curses-driven interface you see below. +Each kernel section is given its own submenu, and you can navigate with +the arrow keys. + + + + + +If you are compiling a kernel that is the same release as the stock +Slackware kernel, you must set the "Local version" option. This is +found on the "General setup" submenu. Failure to set this will result +in your kernel compile over-writing all the modules used by the stock +kernels. This can quickly render your system unbootable. + + + +Once you've finished configuring the kernel, it's time to begin +compiling it. There are many different methods for this, but the most +reliable is to use bzImage. When you pass this argument to +make, the kernel compilation will begin and +you will see lots of data scroll through the terminal until either the +compile process is complete or a fatal error is encountered. + + +darkstar:/usr/src/linux# make bzImage +scripts/kconfig/conf -s arch/x86/Kconfig + CHK include/linux/version.h + CHK include/linux/utsrelease.h + SYMLINK include/asm -> include/asm-x86 + CALL scripts/checksyscalls.sh + CC scripts/mod/empty.o + HOSTCC scripts/mod/mk_elfconfig + MKELF scripts/mod/elfconfig.h + HOSTCC scripts/mod/file2alias.o +... many hundreds of lines ommitted ... + + + +If the process ends in an error, you should check your kernel +configuration first. Compile errors are usually caused by a fault +.config file. Assuming everything went alright, +we're still not entirely finished, as we need to build the modules. + + +darkstar:/usr/src/linux# make modules + CHK include/linux/version.h + CHK include/linux/utsrelease.h + SYMLINK include/asm -> include/asm-x86 + CALL scripts/checksyscalls.sh + HOSTCC scripts/mod/file2alias.o +... many thousands of lines omitted ... + + + +If both the kernel and the modules compiles finished sucessfully, we're +ready to install them. The kernel image needs to be copied into a safe +location, typically the /boot directory, and you +should give it a unique name to avoid overwriting any other kernel +images located there. Traditionaly kernel images are named +vmlinuz with the kernel release and local version +appended. + + +darkstar:/usr/src/linux# cat arch/x86/boot/bzImage > /boot/vmlinuz-release_number-local_version +darkstar:/usr/src/linux# make modules_install + + + +Once these steps have been completed, you will have a new kernel image +located under /boot and a new kernel modules +directory under /lib/modules. In order to use +this new kernel, you will need to edit lilo.conf, +create an initrd for it (only if you need to load one or more of this +kernel's modules to boot), and run lilo to +update the boot loader. When you reboot, if all went according to plan, +you should have an option to boot with your newly compiled kernel. If +something went wrong, you may be spending some time fixing the problem. -- cgit v1.2.3