Emacs
While vi (with its clones) is without a
doubt the most ubiquitous
editor on Unix-like systems, emacs(1) comes
in a good second. Instead of
using different "modes", like vi does, it uses CTRL and ALT key
combinations to enter commands, in much the same way that you can use
CTRL and ALT key combinations in a word processor and indeed in
many other applications to execute certain functions. (Though it should
be noted that the commands rarely correspond; so while many modern
applications use Ctrl-C/ X/ V for copying, cutting and pasting, emacs
uses different keys and actually a somewhat different mechanism for
this.)
Also unlike vi, which is an (excellent) editor and nothing more, emacs
is a program with near endless capabilities. emacs is (for the most
part) written in Lisp, which is a very powerful programming language
that has the peculiar property that every program written in it is
automatically a Lisp compiler of its own. This means that the user can
extend emacs, and in fact write completely new programs "in emacs".
As a result, emacs is not just an editor anymore. There are many add-on
packages for emacs available (many come with the program's source) that
provide all sorts of functionality. Many of these are related to text
editing, which is after all emacs' basic task, but it doesn't stop
there. There are for example several spreadsheet programs for emacs,
there are databases, games, mail and news clients (the top one being
Gnus), etc.
There are two main versions of emacs: GNU Emacs (which is the version
that comes with Slackware) and XEmacs. The latter is not a version for
Emacs running under X. In fact, both emacs and XEmacs run on the
console as well as under X. XEmacs was once started as a project to
tidy up the emacs code. Currently, both versions are being actively
developed, and there is in fact much interaction between the two
development teams. For the present chapter, it is immaterial whether
you use emacs or XEmacs, the differences between them are not relevant
to the normal user.
Starting Emacs
Emacs can be started from the shell by simply typing emacs. When you
are running X, emacs will (normally) come up with its own X window,
usually with a menu bar at the top, where you can find the most
important functions. On startup, emacs will first show a welcome
message, and then after a few seconds will drop you in the *scratch*
buffer. (See Section 17.2.)
You can also start emacs on an existing file by typing
% emacs /etc/resolv.conf
This will cause emacs to load the specified file when it starts up,
skipping the welcome message.
Command Keys
As mentioned above, emacs uses CTRL and ALT combinations for
commands. The usual convention is to write these with C-letter and
M-letter, respectively. So C-x means CTRL+x, and M-x means ALT+x.
(The letter M is used instead of A because originally the key was not
the ALT key but the Meta key. The Meta key has all but disappeared from
computer keyboards, and in emacs the ALT key has taken over its
function.)
Many emacs commands consist of sequences of keys and key combinations.
For example, C-x C-c (that is CTRL-x followed by CTRL-c ) quits
Emacs, C-x C-s saves the current file. Keep in mind that C-x C-b is not
the same as C-x b. The former means CTRL-x followed by CTRL-b,
while the latter means CTRL-x followed by just 'b'.
Buffers
In emacs, the concept of "buffers" is essential. Every file that you
open is loaded into its own buffer. Furthermore, emacs has several
special buffers, which do not contain a file but are used for other
things. Such special buffers usually have a name that starts and ends
with an asterisk. For example, the buffer that emacs shows when it is
first started, is the so-called *scratch* buffer. In the *scratch*
buffer, you can type text in the normal way, but text that is typed
there is not saved when emacs is closed.
There is one other special buffer you need to know about, and that is
the minibuffer. This buffer consists of only one line, and is always on
the screen: it is the very last line of the emacs window, below the
status bar for the current buffer. The minibuffer is where emacs shows
messages for the user, and it is also the place where commands that
require some user input are executed. For example, when you open a
file, emacs will ask for its name in the minibuffer.
Switching from one buffer to another can be done with the command C-x
b. This will prompt you for the name of a buffer (a buffer's name is
usually the name of the file you are editing in it), and it gives a
default choice, which is normally the buffer that you were in before
you switched to or created the current buffer. Just hitting Enter will
switch to that default buffer.
If you want to switch to another buffer than the default offered by
Emacs, just type its name. Note that you can use so-called
Tab-completion here: type the first few letters of the buffer's name
and hit Tab; emacs will then complete the name of the buffer. Tab
completion works everywhere in emacs where it makes sense.
You can get a list of open buffers by hitting C-x C-b. This command
will usually split the screen in two, displaying the buffer you were
working in in the top half, and a new buffer called *Buffer List* in
the bottom half. This buffer contains a list of all the buffers, their
sizes and modes, and the files, if any, that those buffers are visiting
(as it is called in emacs). You can get rid of this split screen by
typing C-x 1.
Modes
Every buffer in emacs has an associated mode. This mode is very
different from the idea of modes in vi: a mode tells you what kind of
buffer you are in. For example, there is text-mode for normal text
files, but there are also modes such as c-mode for editing C programs,
sh-mode for editing shell scripts, latex-mode for editing LaTeX files,
mail-mode for editing email and news messages, etc. A mode provides
special customizations and functionality that is useful for the kind of
file you are editing. It is even possible for a mode to redefine keys
and key commands. For example, in Text mode, the Tab key simply jumps
to the next tab stop, but in many programming language modes, the Tab
key indents the current line according to the depth of the block that
line is in.
The modes mentioned above are called major modes. Each buffer has
exactly one major mode. Additionally, a buffer can have one or more
minor modes. A minor mode provides additional features that may be
useful for certain editing tasks. For example, if you hit the INSERT
key, you invoke overwrite-mode, which does what you'd expect. There is
also an auto-fill-mode, which is handy in combination with text-mode or
latex-mode: it causes each line that you type to be automatically
wrapped once the line reaches a certain number of characters. Without
auto-fill-mode, you have to type M-q to fill out a paragraph. (Which
you can also use to reformat a paragraph after you've edited some text
in it and it is no longer nicely filled out.)
Opening Files
To open a file in emacs, type
C-x C-f
Emacs will ask you for the name of the file, filling in some default
path for you (which is usually ~/ ). After you type the filename (you
can use Tab completion) and hit ENTER , emacs will open the file in a
new buffer and display that buffer on the screen.
Note
Emacs will automatically create a new buffer, it will not load the file
into the current buffer.
In order to create a new file in emacs, you cannot just go typing right
away. You first have to create a buffer for it, and come up with a
filename. You do this by typing C-x C-f and typing a filename, just as
if you were opening an existing file. emacs will notice that the file
you typed doesn't exist, and will create a new buffer and report "(New
file)" in the minibuffer.
When you type C-x C-f and then enter a directory name instead of a
filename, emacs will create a new buffer in which you will find a list
of all the files in that directory. You can move the cursor to the file
that you are looking for and type , and emacs will open it. (There are
in fact a lot more actions you can perform here, such as deleting,
renaming and moving files, etc. emacs is now in dired-mode, which is
basically a simple file manager.)
When you have typed C-x C-f and suddenly change your mind, you can type
C-g to cancel the action. C-g works almost everywhere where you want to
cancel an action or command that you've started but don't want to
finish.
Basic Editing
When you have opened a file, you can of course move around in it with
the cursor. The cursor keys and PgUp, PgDn do what you'd expect. Home
and End jump to the beginning and end of the line. (In older versions,
they would actually jump to the beginning and end of the buffer.)
However, there are also CTRL and Meta (ALT) key combos that move the
cursor around. Because you do not need to move your hands to another
part of the keyboard for these, they are much quicker once you get used
to them. The most important such commands are listed in Table 17-1.
Table 17-1. Basic emacs Editing Commands
Command Result
C-b go one character back
C-f go one character forward
C-n go one line down
C-p go one line up
C-a go to the beginning of the line
C-e go to the end of the line
M-b go one word back
M-f go one word forward
M-} go one paragraph forward
M-{ go one paragraph backward
M-a go one sentence backward
M-e go one sentence forward
C-d delete the character under the cursor
M-d delete until the end of the current word
C-v go down one screen (i.e., PgDn)
M-v go up one screen (i.e., PgUp)
M-< go to the beginning of the buffer
M-> go to the end of the buffer
C-_ undo the last change (can be repeated); note that you actually
have to type SHIFT+CTRL+hyphen for this.
C-k delete to end of line
C-s forward search
C-r backward search
Note that many Meta commands are parallel to the CTRL commands
except that they operate on larger units: while C-f goes forward one
character, M-f goes forward an entire word, etc.
Also note that M-< and M-> require you to type SHIFT+ALT+comma and
SHIFT+ALT+dot respectively, since
< and > are on SHIFT+comma and
SHIFT+dot. (Unless of course you have a different keyboard layout from
the standard US layout.)
Note that C-k deletes (kills, as it is commonly called) all the text
after the cursor to the end of the line, but doesn't delete the line
itself (i.e., it doesn't delete the final newline). It only deletes the
line if there was no text after the cursor. In other words, in order to
delete a complete line, you have to put the cursor at the beginning of
the line, and then hit C-k twice: once to delete the text on the line,
once to delete the line itself.
Saving Files
In order to save a file, you type
C-x C-s
Emacs will not ask you for a filename, the buffer will just be saved to
the file it was loaded from. If you want to save your text to another
file, type
C-x C-w
When you save the file for the first time in this session, emacs will
normally save the old version of your file to a backup file, which has
the same name appended with a tilde: so if you're editing a file
"cars.txt", emacs will create a backup "cars.txt~".
This backup file is a copy of the file that you opened. While you are
working, emacs will also regularly create an auto-save copy of the work
you are doing, to a file named with hash signs: #cars.txt#. This backup
is deleted when you save the file with C-x C-s.
When you are done editing a file, you can kill the buffer that holds it
by typing
C-x k
Emacs will then ask you which buffer you want to kill, with the current
buffer as default, which you can select by hitting ENTER. If you
haven't saved your file yet, emacs will ask you if you really want to
kill the buffer.
Quitting Emacs
When you are done with emacs altogether, you can type
C-x C-c
This quits emacs. If you have any unsaved files, emacs will tell you
so, and ask if you want to save them each in turn. If you answer no to
any of these, emacs will ask for one final confirmation and then quit.