netconfig: Add /sbin/netconfigcurrent-20171117

1 files changed, 706 insertions, 0 deletions

diff --git a/netconfig b/netconfig
new file mode 100644
index 0000000..fbf3bc3
--- /dev/null
+++ b/netconfig
@@ -0,0 +1,706 @@
+#!/bin/sh
+# A script to do basic network configuration.
+# Mostly written by Patrick Volkerding <volkerdi@slackware.com>.
+# Modified to use /etc/rc.d/rc.inet1.conf Tue Aug 26 16:51:48 PDT 2003 <pjv>
+
+write_config_files() {
+#
+############################################################################
+#			  The rc.inet1.conf file.
+############################################################################
+#
+
+# If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in
+# rc.inet1.conf... it's better to leave the values null.  However, since
+# we use the IP in other places, we need to make a copy for here.
+RCIPCOPY=$IPADDR
+RCMASKCOPY=$NETMASK
+if [ "$RCIPCOPY" = "127.0.0.1" ]; then
+  RCIPCOPY=""
+  RCMASKCOPY=""
+fi
+
+# echo "Creating /$RC..."
+/bin/cat << ENDFILE > $RC
+# /etc/rc.d/rc.inet1.conf
+#
+# This file contains the configuration settings for network interfaces.
+# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
+# If you don't have an interface, leave the settings null ("").
+
+# You can configure network interfaces other than eth0,eth1... by setting
+# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
+# or empty, it is assumed you're configuring eth<interface>.
+
+# Several other parameters are available, the end of this file contains a
+# comprehensive set of examples.
+
+# =============================================================================
+
+# Config information for eth0:
+IPADDR[0]="$RCIPCOPY"
+NETMASK[0]="$RCMASKCOPY"
+IPALIASES[0]=""
+USE_DHCP[0]="$USE_DHCP"
+DHCP_HOSTNAME[0]="$DHCP_HOSTNAME"
+
+# Config information for eth1:
+IPADDR[1]=""
+NETMASK[1]=""
+IPALIASES[1]=""
+USE_DHCP[1]=""
+DHCP_HOSTNAME[1]=""
+
+# Config information for eth2:
+IPADDR[2]=""
+NETMASK[2]=""
+IPALIASES[2]=""
+USE_DHCP[2]=""
+DHCP_HOSTNAME[2]=""
+
+# Config information for eth3:
+IPADDR[3]=""
+NETMASK[3]=""
+IPALIASES[3]=""
+USE_DHCP[3]=""
+DHCP_HOSTNAME[3]=""
+
+# Default gateway IP address:
+GATEWAY="$GATEWAY"
+
+# Change this to "yes" for debugging output to stdout.  Unfortunately,
+# /sbin/hotplug seems to disable stdout so you'll only see debugging output
+# when rc.inet1 is called directly.
+DEBUG_ETH_UP="no"
+
+# Example of how to configure a bridge:
+# Note the added "BRNICS" variable which contains a space-separated list
+# of the physical or virtual network interfaces you want to add to the bridge.
+#IFNAME[0]="br0"
+#BRNICS[0]="eth0"
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="255.255.255.0"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+
+# Virtual interfaces to create - these are created before any address
+# configuration or bridge setup is done, so you may use these interfaces
+# as IFNAME or BRNICS values. These can be tun or tap interfaces:
+# adjust VIRTIFNAME and VIRTIFTYPE accordingly
+#
+# Virtual tap interface example
+#VIRTIFNAME[0]="tap0"
+#VIRTIFTYPE[0]="tap"
+#VIRTIFUSER[0]="root"
+#VIRTIFGROUP[0]="root"
+#
+# Virtual tun interface example
+#VIRTIFNAME[1]="tun0"
+#VIRTIFTYPE[1]="tun"
+#VIRTIFUSER[1]="someuser"
+#VIRTIFGROUP[1]="somegroup"
+
+## Example config information for wlan0.  Uncomment the lines you need and fill
+## in your data.  (You may not need all of these for your wireless network)
+#IFNAME[4]="wlan0"
+#IPADDR[4]=""
+#NETMASK[4]=""
+#USE_DHCP[4]="yes"
+#DHCP_HOSTNAME[4]="icculus-wireless"
+#DHCP_KEEPRESOLV[4]="yes"
+#DHCP_KEEPNTP[4]="yes"
+#DHCP_KEEPGW[4]="yes"
+#DHCP_IPADDR[4]=""
+#WLAN_ESSID[4]=DARKSTAR
+#WLAN_MODE[4]=Managed
+#WLAN_RATE[4]="54M auto"
+#WLAN_CHANNEL[4]="auto"
+#WLAN_KEY[4]="D5A31F54ACF0487C2D0B1C10D2"
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=96389dc66eaf7e6efd5b5523ae43c7925ff4df2f8b7099495192d44a774fda16"
+#WLAN_WPA[4]="wpa_supplicant"
+#WLAN_WPADRIVER[4]="wext"
+#WLAN_WPAWAIT[4]=30
+
+## Some examples of additional network parameters that you can use.
+## Config information for wlan0:
+#IFNAME[4]="wlan0"              # Use a different interface name instead of
+                                # the default 'eth4'
+#IFNAME[4]="eth0:1"             # Set up an IP alias.
+#HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
+#MTU[4]=""                      # The default MTU is 1500, but you might need
+                                # 1360 when you use NAT'ed IPSec traffic.
+#DHCP_TIMEOUT[4]=15             # The default timeout for the DHCP client to
+                                # wait for server resonse is 10 seconds, but
+                                # you might want a shorter or longer wait.
+#DHCP_KEEPRESOLV[4]="yes"       # If you don't want /etc/resolv.conf overwritten
+#DHCP_KEEPNTP[4]="yes"          # If you don't want ntp.conf overwritten
+#DHCP_KEEPGW[4]="yes"           # If you don't want the DHCP server to change
+                                # your default gateway
+#DHCP_IPADDR[4]=""              # Request a specific IP address from the DHCP
+                                # server
+#DHCP_DEBUG[4]="yes"            # Make dhcpcd show verbose diagnostics
+#DHCP_NOIPV4LL[4]="yes"         # Do not assign an ipv4ll address when a DHCP
+                                # server is not found (ipv4ll link-local
+                                # adresses in the IP range 169.254.0.0/16 are
+                                # also known as "zeroconf" addresses)
+#WLAN_ESSID[4]=DARKSTAR         # An example of how you can override _any_
+                                # parameter defined in rc.wireless.conf, by
+                                # prepending 'WLAN_' to the parameter's name.
+                                # Useful with multiple wireless interfaces.
+#WLAN_IWPRIV[4]="set AuthMode=WPAPSK | set EncrypType=TKIP | set WPAPSK=thekey"
+                                # Some drivers require a private ioctl to be
+                                # set through the iwpriv command. If more than
+                                # one is required, you can place them in the
+                                # IWPRIV parameter (separated with the pipe (|)
+                                # character, see the example).
+#WLAN_WPA[4]="wpa_supplicant"   # Run wpa_supplicant for WPA support
+#WLAN_WPADRIVER[4]="ndiswrapper"# Tell wpa_supplicant to specifically use the
+                                # ndiswrapper driver (if you leave this empty
+                                # the 'wext' driver is used by default)
+#WLAN_WPAWAIT[4]=30             # In case it takes long for the WPA association
+                                # to finish, you can increase the wait time
+                                # (defaults to 10 seconds)
+ENDFILE
+#
+############################################################################
+#			  The networks file.
+############################################################################
+#
+#echo "Creating /$ETCNETWORKS..."
+/bin/cat <<EOF >$ETCNETWORKS
+#
+# networks	This file describes a number of netname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#
+
+loopback	127.0.0.0
+localnet	$NETWORK
+
+# End of networks.
+EOF
+chmod 644 $ETCNETWORKS
+#
+############################################################################
+#			   The hosts file.
+############################################################################
+#
+#echo "Creating /$HOSTS..."
+/bin/cat << EOF > $HOSTS
+#
+# hosts		This file describes a number of hostname-to-address
+#		mappings for the TCP/IP subsystem.  It is mostly
+#		used at boot time, when no name servers are running.
+#		On small systems, this file can be used instead of a
+#		"named" name server.  Just add the names, addresses
+#		and any aliases to this file...
+#
+# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
+# should NEVER be named with the name of the machine.  It causes problems
+# for some (stupid) programs, irc and reputedly talk. :^)
+#
+
+# For loopbacking.
+127.0.0.1		localhost
+$IPADDR		$HOSTNM.$DOMAIN $HOSTNM
+
+# End of hosts.
+
+EOF
+chmod 644 $HOSTS
+#
+############################################################################
+#			The resolv.conf file.
+############################################################################
+#
+if [ ! "$NAMESERVER" = "" ]; then
+  echo "search $DOMAIN" >$RESOLV
+  echo "nameserver $NAMESERVER" >>$RESOLV
+else
+  echo "search $DOMAIN" >$RESOLV
+fi
+if [ -f $RESOLV ]; then
+  chmod 644 $RESOLV
+fi
+#
+############################################################################
+#			The rc.netdevice file.
+############################################################################
+#
+if [ -r /cardfound ]; then
+  if [ ! "`cat /cardfound`" = "" ]; then
+    cat << EOF > etc/rc.d/rc.netdevice
+# Load module for network device.
+# This script is automatically generated during the installation.
+
+/sbin/modprobe `cat /cardfound`
+
+EOF
+    chmod 755 etc/rc.d/rc.netdevice
+  fi
+fi
+rm -f $TMP/tempmsg /cardfound
+} # end write_config_files
+
+TMP=/var/log/setup/tmp
+if [ ! -d $TMP ]; then
+ mkdir -p $TMP
+ chmod 700 $TMP
+fi
+
+# This checks IP address syntax.
+# usage: syntax_check ADDRESS #-OF-EXPECTED-SEGMENTS (up to 4)
+# example: syntax_check 123.22.43.1 4
+# returns: 0=found correct  1=too many fields  2=non numeric field found
+syntax_check_color() {
+  RET_CODE=0 
+  SCRATCH=$1
+  SCRATCH=`echo $SCRATCH | tr "." "/"`
+  INDEX=$2
+  while [ ! "$INDEX" = "0" ]; do
+    # OK, so I'm a LISP-head :^)
+    FIELD=`basename $SCRATCH`
+    SCRATCH=`dirname $SCRATCH`
+    if expr $FIELD + 1 1> /dev/null 2> /dev/null; then
+      true
+    else
+      RET_CODE=2; # non-numeric field
+    fi
+    INDEX=`expr $INDEX - 1`
+  done
+  if [ ! "$SCRATCH" = "." ]; then
+    RET_CODE=1; # too many arguments
+  fi
+  if [ "$3" = "WARN" -a ! "$RET_CODE" = "0" ]; then
+    cat << EOF > $TMP/tempmsg
+
+The address you have entered seems to be non-standard. We were expecting
+$2 groups of numbers seperated by dots, like: 127.0.0.1
+Are you absolutely sure you want to use the address $1?
+
+EOF
+    dialog --title "WARNING" --yesno "`cat $TMP/tempmsg`" 9 72
+    if [ $? = 0 ]; then
+      RET_CODE = 0;
+    fi
+    rm -r $TMP/tempmsg
+  else
+    if [ "$3" = "ECHO" ]; then
+      echo $RET_CODE;
+    fi
+  fi
+  return $RET_CODE;
+}
+
+# Figure out where we are...  cheap hack.
+if [ ! -e etc/slackware-version -a ! -e /etc/installer -a ! -e bin/bash ]; then
+  cd /
+fi;
+
+# IMPORTANT!!! NO LEADING '/' in the paths below, or this script will not
+# function from the bootdisk.
+RC=etc/rc.d/rc.inet1.conf		# Where rc.inet1.conf file is.
+RESOLV=etc/resolv.conf			# Where resolv.conf file is.
+HOSTS=etc/hosts			 	# Where hosts file is.
+ETCNETWORKS=etc/networks		# Where networks file is.
+USE_DHCP=""                             # Use DHCP?  "" == no.
+DHCP_HOSTNAME=""                        # This is our DHCP hostname.
+#
+# defaults:
+NETWORK=127.0.0.0
+IPADDR=127.0.0.1
+NETMASK=255.255.255.0
+
+
+# Main loop:
+while [ 0 ]; do
+cat << EOF > $TMP/tempmsg
+First, we'll need the name you'd like to give your host.
+Only the base hostname is needed right now. (not the domain)
+
+Enter hostname:
+EOF
+ dialog --title "ENTER HOSTNAME" --inputbox "`cat $TMP/tempmsg`" 11 65 \
+ $HOSTNM 2> $TMP/SeThost
+ if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/SeThost $TMP/tempmsg
+  exit
+ fi
+ HOSTNM="`cat $TMP/SeThost`"
+ rm -f $TMP/SeThost $TMP/tempmsg
+ if [ ! "$HOSTNM" = "" ]; then
+  break;
+ fi
+done
+
+while [ 0 ]; do
+cat << EOF > $TMP/tempmsg
+Now, we need the domain name for this machine, such as:
+
+example.org
+
+Do not supply a leading '.'
+
+Enter domain name for $HOSTNM: 
+EOF
+ dialog --title "ENTER DOMAINNAME FOR '$HOSTNM'" --inputbox \
+"`cat $TMP/tempmsg`" \
+14 64 $DOMAIN 2> $TMP/SeTdom
+ if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/SeTdom $TMP/tempmsg
+  exit
+ fi
+ DOMAIN="`cat $TMP/SeTdom`"
+ rm -f $TMP/SeTdom $TMP/tempmsg
+ if [ ! "$DOMAIN" = "" ]; then
+  break;
+ fi
+done
+
+# Write the hostname with domain to /etc/HOSTNAME:
+echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+# Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
+if [ -w etc/NetworkManager/NetworkManager.conf ]; then
+  sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
+fi
+
+dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \
+--default-item DHCP \
+--menu \
+"Now we need to know how your machine connects to the network.\n\
+If you have an internal network card and an assigned IP address, gateway, \
+and DNS, use the 'static IP' choice to enter these values.  If your IP \
+address is assigned by a DHCP server (commonly used by cable modem and DSL \
+services), select 'DHCP'.  If you do not have a network card, select \
+the 'loopback' choice.  You may also select 'NetworkManager' if you would \
+like to have the NetworkManager daemon automatically handle your wired and \
+wireless network interfaces (this is simple and usually works). \
+Which type of network setup would you like?"  20 70 4 \
+"static IP" "Use a static IP address to configure ethernet" \
+"DHCP" "Use a DHCP server to configure ethernet" \
+"loopback" "Set up a loopback connection (modem or no net)" \
+"NetworkManager" "Autoconfigure network using NetworkManager" 2> $TMP/reply
+if [ $? = 1 -o $? = 255 ]; then
+  rm -f $TMP/reply
+  exit
+fi
+REPLY=`cat $TMP/reply`
+rm -f $TMP/reply
+
+if [ "$REPLY" = "DHCP" ]; then
+  USE_DHCP="yes"
+  dialog --title "SET DHCP HOSTNAME"  --inputbox "Some network providers require \
+that the DHCP hostname be set in order to connect.  If so, they'll have assigned \
+a hostname to your machine, which may look something like CC-NUMBER-A (this \
+depends on your ISP).  If you were assigned a DHCP hostname, please enter it \
+below.  If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \
+2> $TMP/SeTDHCPHOST
+  NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`"
+  rm -f $TMP/SeTDHCPHOST
+  # OK, if we actually got something, use it.
+  DHCP_HOSTNAME="$NEW_DHCPHOST"
+elif [ "$REPLY" = "loopback" ]; then
+  LOOPBACK="yes"
+elif [ "$REPLY" = "NetworkManager" ]; then
+  LOOPBACK="yes"
+  NETWORKMANAGER="yes"
+else
+  LOOPBACK="no"
+fi
+
+if [ "$LOOPBACK" = "no" -a ! "$USE_DHCP" = "yes" ]; then
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTIP ]; then
+   IPADDR=`cat $TMP/SeTIP`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter your IP address for the local machine.  Example: 
+111.112.113.114
+Enter IP address for $HOSTNM (aaa.bbb.ccc.ddd): 
+EOF
+  dialog --title "ENTER IP ADDRESS FOR '$HOSTNM.$DOMAIN'" --inputbox \
+"`cat $TMP/tempmsg`" \
+10 68 $IPADDR 2> $TMP/SeTlip
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTlip $TMP/tempmsg
+   exit
+  fi
+  IPADDR="`cat $TMP/SeTlip`"
+  rm -f $TMP/SeTlip $TMP/tempmsg
+  if [ "$IPADDR" = "" ]; then
+   continue;
+  fi
+  syntax_check_color $IPADDR 4 WARN
+  if [ $? = 0 ]; then
+   echo $IPADDR > $TMP/SeTIP
+   break;
+  fi
+ done
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTnetmask ]; then
+   NETMASK=`cat $TMP/SeTnetmask`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter your netmask.  This will generally look something
+like this: 255.255.255.0
+Enter netmask (aaa.bbb.ccc.ddd):
+EOF
+  dialog --title "ENTER NETMASK FOR LOCAL NETWORK" --inputbox \
+"`cat $TMP/tempmsg`" \
+10 65 $NETMASK 2> $TMP/SeTnmask
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTnmask $TMP/tempmsg
+   exit
+  fi
+  NETMASK="`cat $TMP/SeTnmask`"
+  rm -f $TMP/SeTnmask $TMP/tempmsg
+  if [ "$NETMASK" = "" ]; then
+   continue;
+  fi
+  syntax_check_color $NETMASK 4 WARN
+  if [ $? = 0 ]; then
+   echo $NETMASK > $TMP/SeTnetmask
+   break;
+  fi
+ done
+ 
+ # Set broadcast/network addresses automatically:
+ BROADCAST=`ipmask $NETMASK $IPADDR | cut -f 1 -d ' '`
+ NETWORK=`ipmask $NETMASK $IPADDR | cut -f 2 -d ' '`
+
+ while [ 0 ]; do
+  if [ -r $TMP/SeTgateway ]; then
+   GATEWAY=`cat $TMP/SeTgateway`
+  fi
+  cat << EOF > $TMP/tempmsg
+Enter the address for the gateway on your network, such as:
+`echo $IPADDR | cut -f 1-3 -d .`.1
+
+If you don't have a gateway on your network just hit ENTER
+without entering a gateway IP address.
+
+Enter gateway address (aaa.bbb.ccc.ddd):
+EOF
+  dialog --title "ENTER GATEWAY ADDRESS" --inputbox "`cat $TMP/tempmsg`" \
+  14 64 $GATEWAY 2> $TMP/SeTgate
+  if [ $? = 1 -o $? = 255 ]; then
+   rm -f $TMP/SeTgate $TMP/tempmsg
+   exit
+  fi
+  GATEWAY="`cat $TMP/SeTgate`"
+  rm -f $TMP/SeTgate $TMP/tempmsg
+  if [ "$GATEWAY" = "" ]; then
+    echo > $TMP/SeTgateway
+    break;
+  fi
+  syntax_check_color $GATEWAY 4 WARN
+  if [ $? = 0 ]; then
+    echo $GATEWAY > $TMP/SeTgateway
+    break;
+  fi
+ done
+fi
+
+if [ "$LOOPBACK" = "no" ]; then
+ dialog --title "USE A NAMESERVER?" --yesno "Will you be accessing a \
+nameserver?" 5 42
+ if [ $? = 0 ]; then
+  if [ ! "`cat $TMP/SeTns 2> /dev/null`" = "" ]; then
+    DNSSAMPLE="`cat $TMP/SeTns 2> /dev/null`"
+  elif [ "$GATEWAY" = "" ]; then
+    DNSSAMPLE=`echo $IPADDR | cut -f 1-3 -d .`
+  else
+    DNSSAMPLE=$GATEWAY
+  fi
+  while [ "$NAMESERVER" = "" ]; do
+   cat << EOF > $TMP/tempmsg
+Here is your current IP address, full hostname, and base hostname:
+$IPADDR       $HOSTNM.$DOMAIN    $HOSTNM
+
+Please give the IP address of the name server to use,
+such as $DNSSAMPLE.
+
+You can add more Domain Name Servers later by editing /$RESOLV.
+
+Primary name server to use (aaa.bbb.ccc.ddd): 
+EOF
+   dialog --title "SELECT NAMESERVER" --inputbox \
+"`cat $TMP/tempmsg`" 17 72 $DNSSAMPLE 2> $TMP/SeTns
+   if [ $? = 1 -o $? = 255 ]; then
+    rm -f $TMP/tempmsg $TMP/SeTns 
+    break
+   fi
+   NAMESERVER="`cat $TMP/SeTns`"
+   rm -f $TMP/tempmsg $TMP/SeTns 
+  done
+ fi
+fi
+
+# Check for existing network driver:
+unset DONOTPROBE
+if cat /proc/net/dev | grep eth0 1> /dev/null 2> /dev/null ; then
+  DONOTPROBE=true 
+fi
+
+# Really, this rc.netdevice thing is mostly obsolete except for
+# handmade local scripts anyway, these days with udev...
+# So, we'll skip it:
+DONOTPROBE=true
+
+if [ -d lib/modules/`uname -r` \
+     -a ! "$LOOPBACK" = "yes" \
+     -a ! -x etc/rc.d/rc.hotplug \
+     -a ! "$DONOTPROBE" = "true" \
+     -a ! -r /cardfound ]; then
+  dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \
+can look to see what kind of network card you have in your machine, and \
+if we find one create an /etc/rc.d/rc.netdevice script to load the module \
+for it at boot time.  There's a slight bit of danger that the probing \
+can cause problems, but it almost always works.  If you'd rather configure \
+your system manually, you can skip the probing process and edit \
+/etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \
+16 68 2 \
+"probe" "look for network cards to set up" \
+"skip" "skip probe;  edit /etc/rc.d/rc.modules later" 2> $TMP/reply
+  if [ $? = 1 -o $? = 255 ]; then
+    rm -f $TMP/reply
+    exit
+  fi
+  REPLY=`cat $TMP/reply`
+  rm -f $TMP/reply
+  if [ ! "$REPLY" = "skip" ]; then
+    for card in 3c59x 82596 dgrs eepro100 e1000 epic100 hp100 lance \
+    ne2k-pci olympic pcnet32 rcpci 8139too 8139cp tlan tulip via-rhine \
+    yellowfin natsemi ; do
+      chroot . /sbin/modprobe $card 2> /dev/null
+      if [ $? = 0 ]; then
+        dialog --title "CARD DETECTED" --msgbox "A networking card using \
+the $card.o module has been detected." 5 72
+        echo "$card" > /cardfound
+        break;
+      fi
+     done
+     if [ ! -r /cardfound ]; then
+       # Don't probe for com20020, because it doesn't check and will always load.
+       # Don't probe for arlan, because it needs irq= to work.
+       # Don't probe for com90io or com90xx because they taint the kernel.
+       for card in depca ibmtr 3c359 3c501 3c503 3c505 3c507 3c509 3c515 ac3200 \
+         abyss acenic at1700 cosa cs89x0 de4x5 de600 \
+         de620 dmfe dl2k e2100 eepro eexpress eth16i ewrk3 fealnx hamachi hostess_sv11 \
+         hp-plus hp lanstreamer ni5010 ni52 ni65 ns83820 sb1000 sealevel sis900 sk98lin skfp smc-ultra \
+         smc9194 smctr starfire sungem sunhme tg3 wd e100 iph5526 lp486e tmspci winbond-840 ; do
+         chroot . /sbin/modprobe $card 2> /dev/null
+         if [ $? = 0 ]; then
+           dialog --title "CARD DETECTED" --msgbox "A networking card using \
+the $card.o module has been detected." 5 72
+           echo "$card" > /cardfound
+           break
+         fi
+       done
+     fi
+     if [ ! -r /cardfound ]; then
+       dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \
+card could be probed for on your system.  Some cards (like non-PCI NE2000s) \
+must be supplied with the I/O address to use and can't be probed for safely. \
+You'll have to try to configure the card later by editing \
+/etc/rc.d/rc.modules or recompiling your kernel." 9 70
+     fi
+  fi
+fi
+
+if [ "$LOOPBACK" = "yes" -a ! "$NETWORKMANAGER" = "yes" ]; then
+  dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
+system is now configured to use loopback:
+
+IP address: 127.0.0.1
+Netmask: 255.255.255.0
+
+Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then
+  dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \
+system is now configured to use NetworkManager for
+wired and wireless network management.  To set up wireless networks
+and view status, add the Network Management control panel widget to
+your KDE desktop.
+
+Is this correct?  Press 'Yes' to confirm, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+elif [ "$USE_DHCP" = "" ]; then
+  while [ 0 ]; do
+    dialog --title "CONFIRM NETWORK SETUP" \
+--ok-label Accept \
+--extra-label Edit \
+--cancel-label Restart \
+--inputmenu \
+"These are the settings you have entered.  To accept them and complete \
+the networking setup, press enter.  If you need to make any changes, you \
+can do that now (or reconfigure later using 'netconfig')." \
+22 60 12 \
+"Hostname:" "$HOSTNM" \
+"Domain name:" "$DOMAIN" \
+"IP address:" "$IPADDR" \
+"Netmask:" "$NETMASK" \
+"Gateway:" "$GATEWAY" \
+"Nameserver:" "$NAMESERVER" 2> $TMP/tempmsg
+    RETVAL=$?
+    if [ "$RETVAL" = "3" ]; then
+      FIELD=`cat $TMP/tempmsg | cut -f 1 -d : | cut -f 2- -d ' '`
+      NEWVAL=`cat $TMP/tempmsg | cut -f 2 -d : | cut -f 2- -d ' '`
+      if [ "$FIELD" = "Hostname" ]; then
+        HOSTNM=$NEWVAL
+      elif [ "$FIELD" = "Domain name" ]; then
+        DOMAIN=$NEWVAL
+      elif [ "$FIELD" = "IP address" ]; then
+        IPADDR=$NEWVAL
+      elif [ "$FIELD" = "Netmask" ]; then
+        NETMASK=$NEWVAL
+      elif [ "$FIELD" = "Gateway" ]; then
+        GATEWAY=$NEWVAL
+      elif [ "$FIELD" = "Nameserver" ]; then
+        NAMESERVER=$NEWVAL
+      fi
+    else
+      break
+    fi
+  done
+else # DHCP was used
+  dialog --title "CONFIRM SETUP COMPLETE" \
+--yesno "Your networking system is now configured to use DHCP:
+
+  Hostname:     $HOSTNM
+  Domain name:  $DOMAIN
+  IP address:   (use DHCP server)
+  Netmask:      (use DHCP server)
+  Gateway:      (use DHCP server)
+  Nameserver:   (use DHCP server)
+
+Is this correct?  Press 'Yes' to continue, or 'No' to reconfigure." 0 0
+  RETVAL=$?
+fi
+
+if [ "$RETVAL" = "0" ]; then
+  # Write the hostname with domain to /etc/HOSTNAME:
+  echo $HOSTNM.$DOMAIN > etc/HOSTNAME
+  # Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf:
+  if [ -w etc/NetworkManager/NetworkManager.conf ]; then
+    sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf
+  fi
+  write_config_files
+  if [ "$NETWORKMANAGER" = "yes" -a -r etc/rc.d/rc.networkmanager ]; then
+    chmod 755 etc/rc.d/rc.networkmanager
+  fi
+  if [ "$1" = "" ]; then
+    dialog --msgbox "Settings accepted.  Basic network configuration is complete." 6 40
+  fi
+else
+  if [ "$1" = "" ]; then
+    dialog --msgbox "Settings discarded.  Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60
+  fi
+fi
+
+exit $RETVAL
+