summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDarren 'Tadgy' Austin <darren@afterdark.org.uk>2019-11-13 20:44:18 +0000
committerDarren 'Tadgy' Austin <darren@afterdark.org.uk>2019-11-13 20:44:18 +0000
commit247bad13e843f349d062b86dafeec8fd3b8162e7 (patch)
tree627ebab3bf02b957133e1fbc75fc5600fb6d336a
parentff04de0b45fe7f24685af3b9523260a313fd0942 (diff)
downloadslacknetsetup-247bad13e843f349d062b86dafeec8fd3b8162e7.tar.xz
In rc.inet1.conf, be consistant with spacing and commenting.
-rw-r--r--rc.inet1.conf91
1 files changed, 45 insertions, 46 deletions
diff --git a/rc.inet1.conf b/rc.inet1.conf
index aba374c..cdb66ba 100644
--- a/rc.inet1.conf
+++ b/rc.inet1.conf
@@ -1,19 +1,19 @@
# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
-
+#
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
# If you don't have an interface, leave the settings null ("").
-
+#
# You can configure network interfaces other than eth0,eth1... by setting
# IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
# or empty, it is assumed you're configuring eth<interface>.
-
-# Several other parameters are available, the end of this file contains a
+#
+# Several other parameters are available; the end of this file contains a
# comprehensive set of examples.
-
+#
# Important note for IPv6 stateless auto configuration (SLAAC) users:
-# From Slackware 15.0 onwards, you need to set USE_SLAAC[0]="yes" (etc) below
+# From Slackware 15.0 onwards, you need to set USE_SLAAC[0]="yes" below.
# =============================================================================
@@ -68,51 +68,51 @@ GATEWAY6=""
# =============================================================================
-# Change this to "yes" for debugging output to stdout.
+# Change this to "yes" for debugging output to syslog (if available, stdout if
+# not).
DEBUG_ETH_UP="no"
# MAXNICS is the maximum number of interfaces that will be configured.
# You may need to increase the MAXNICS value if you have many interfaces, or
# you use multiple VLANs and/or bridges. The default is 6.
-# MAXNICS="6"
+#MAXNICS="6"
# =============================================================================
# Example of how to configure a bond (link aggrigation) interface.
-# IFNAME[0]="bond0"
-# BONDNICS[0]="eth0 eth1"
-# BONDMODE[0]="balance-rr"
-# BONDOPTS[0]="xmit_hash_policy layer2+3 | miimon 100"
-# IPADDR[0]="192.168.0.1"
-# NETMASK[0]="24"
-# IPALIASES[0]=""
-# USE_DHCP[0]=""
-# DHCP_HOSTNAME[0]=""
-# IP6ADDRS[0]=""
-# USE_SLAAC[0]=""
-# USE_DHCP6[0]=""
+#IFNAME[0]="bond0"
+#BONDNICS[0]="eth0 eth1"
+#BONDMODE[0]="balance-rr"
+#BONDOPTS[0]="xmit_hash_policy layer2+3 | miimon 100"
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+#IP6ADDRS[0]=""
+#USE_SLAAC[0]=""
+#USE_DHCP6[0]=""
# =============================================================================
-# Example of how to configure a VLAN interface.
+# Example of how to configure a VLAN interface:
# The VLAN ID is taken from the full interface name, which is comprised of the
# underlying interface name, a period (.) and then the VLAN ID.
# VLANOPTS is a pipe (|) delimited list of VLAN module specific settings to be
# applied to the interface. See the ip-link(8) man page (search for "VLAN Type
# Support") for details of the options available. This option is not required
# for a standard VLAN to be configured.
-#
-# IFNAME[0]="eth0.10"
-# VLANOPTS[0]=""
-# IPADDR[0]="192.168.10.1"
-# NETMASK[0]="24"
-# IPALIASES[0]=""
-# USE_DHCP[0]=""
-# DHCP_HOSTNAME[0]=""
-# IP6ADDRS[0]=""
-# USE_SLAAC[0]=""
-# USE_DHCP6[0]=""
+#IFNAME[0]="eth0.10"
+#VLANOPTS[0]=""
+#IPADDR[0]="192.168.10.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+#IP6ADDRS[0]=""
+#USE_SLAAC[0]=""
+#USE_DHCP6[0]=""
# =============================================================================
@@ -123,14 +123,14 @@ DEBUG_ETH_UP="no"
# applied to the interface. See the ip-link(8) man page (search for "BRIDGE
# Type Support") for details of the options available. This option is not
# required for a standard bridge to be configured.
-# IFNAME[0]="br0"
-# BRNICS[0]="eth0"
-# BROPTS[0]=""
-# IPADDR[0]="192.168.0.1"
-# NETMASK[0]="24"
-# IPALIASES[0]=""
-# USE_DHCP[0]=""
-# DHCP_HOSTNAME[0]=""
+#IFNAME[0]="br0"
+#BRNICS[0]="eth0"
+#BROPTS[0]=""
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
# =============================================================================
@@ -140,13 +140,12 @@ DEBUG_ETH_UP="no"
# adjust VIRTIFNAME and VIRTIFTYPE accordingly.
# Starting with VIRTIFNAME[0] is mandatory, and each next one must be
# incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
-#
# Virtual tap interface example
#VIRTIFNAME[0]="tap0"
#VIRTIFTYPE[0]="tap"
#VIRTIFUSER[0]="root"
#VIRTIFGROUP[0]="root"
-#
+
# Virtual tun interface example
#VIRTIFNAME[1]="tun0"
#VIRTIFTYPE[1]="tun"
@@ -155,8 +154,9 @@ DEBUG_ETH_UP="no"
# =============================================================================
-## Example config information for wlan0. Uncomment the lines you need and fill
-## in your data. (You may not need all of these for your wireless network)
+# Example config information for wlan0:
+# Uncomment the lines you need and fill in your data. You may not need all of
+# these for your wireless network.
#IFNAME[4]="wlan0"
#IPADDR[4]=""
#NETMASK[4]=""
@@ -178,8 +178,7 @@ DEBUG_ETH_UP="no"
# =============================================================================
-## Some examples of additional network parameters that you can use.
-## Config information for wlan0:
+# Some examples of additional network parameters that you can use.
#IFNAME[4]="wlan0" # Use a different interface name instead of
# the default 'eth4'
#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given