A couple of updates to netconfig and rc.inet1.conf.

1 files changed, 6 insertions, 4 deletions

diff --git a/netconfig b/netconfig
index 3a90a4f..f125455 100644
--- a/netconfig
+++ b/netconfig
@@ -118,7 +118,8 @@ GATEWAY6="$GATEWAY6"
 # degradation.  In 'active-backup' mode, the 'primary' option should also be
 # supplied.  When using '802.3ad' mode, set "lacp_rate fast" for faster
 # recovery from an interface failure.  In other modes, the 'xmit_hash_policy'
-# should be set.
+# should be set.  See the /usr/src/linux/Documentation/networking/bonding.txt
+# file (search for "Bonding Driver Options") for the full set of options.
 #IFNAME[0]="bond0"
 #BONDNICS[0]="eth0 eth1"
 #BONDMODE[0]="balance-rr"
@@ -220,9 +221,10 @@ GATEWAY6="$GATEWAY6"
 # Some examples of additional network parameters that you can use.
 #IFNAME[4]="wlan0"              # Use a different interface name instead of
                                 # the default 'eth4'
-#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias.  A netmask may be given
-                                # with a /<prefix> after the IP address - if
-                                # not supplied, /24 will be used as default.
+#IPALIASES[4]="192.168.5.10/24" # A space delimited list of CIDR formatted IP
+                                # aliases to assign to the interface after it
+                                # has come up.  If no /<prefix> is given after
+                                # the IP address, /24 will be used as default.
 #HWADDR[4]="00:01:23:45:67:89"  # Overrule the card's hardware MAC address
 #MTU[4]=""                      # The default MTU is 1500, but you might need
                                 # 1360 when you use NAT'ed IPSec traffic.