diff options
| author | Darren 'Tadgy' Austin <darren@afterdark.org.uk> | 2019-11-13 22:10:37 +0000 |
|---|---|---|
| committer | Darren 'Tadgy' Austin <darren@afterdark.org.uk> | 2019-11-13 22:10:37 +0000 |
| commit | 13dbfe19e521b9821dba0fee36a9e0ed8ab07fb6 (patch) | |
| tree | 2d3492c3dd3c35cbedbc33cdf3da786cecd8937a /rc.inet1.conf | |
| parent | 247bad13e843f349d062b86dafeec8fd3b8162e7 (diff) | |
| download | slacknetsetup-13dbfe19e521b9821dba0fee36a9e0ed8ab07fb6.tar.xz | |
Remove BONDOPTS, VLANOPTS and BROPTS and replace with generic IFOPTS.
Previously we had an xOPTS variable for each type of interface that could
be configured. I've replaced this with a generic IFOPTS option which can
be used to supply interface type specific options to 'ip'.
As the option is now generic, it can be applied to physical interfaces too;
so interfaces such as eth0 can have options applied just like a virtual
interface.
Diffstat (limited to 'rc.inet1.conf')
| -rw-r--r-- | rc.inet1.conf | 33 |
1 files changed, 19 insertions, 14 deletions
diff --git a/rc.inet1.conf b/rc.inet1.conf index cdb66ba..8ac6c8d 100644 --- a/rc.inet1.conf +++ b/rc.inet1.conf @@ -68,23 +68,12 @@ GATEWAY6="" # ============================================================================= -# Change this to "yes" for debugging output to syslog (if available, stdout if -# not). -DEBUG_ETH_UP="no" - -# MAXNICS is the maximum number of interfaces that will be configured. -# You may need to increase the MAXNICS value if you have many interfaces, or -# you use multiple VLANs and/or bridges. The default is 6. -#MAXNICS="6" - -# ============================================================================= - # Example of how to configure a bond (link aggrigation) interface. #IFNAME[0]="bond0" #BONDNICS[0]="eth0 eth1" #BONDMODE[0]="balance-rr" -#BONDOPTS[0]="xmit_hash_policy layer2+3 | miimon 100" +#IFOPTS[0]="xmit_hash_policy layer2+3 | miimon 100" #IPADDR[0]="192.168.0.1" #NETMASK[0]="24" #IPALIASES[0]="" @@ -104,7 +93,7 @@ DEBUG_ETH_UP="no" # Support") for details of the options available. This option is not required # for a standard VLAN to be configured. #IFNAME[0]="eth0.10" -#VLANOPTS[0]="" +#IFOPTS[0]="" #IPADDR[0]="192.168.10.1" #NETMASK[0]="24" #IPALIASES[0]="" @@ -125,7 +114,7 @@ DEBUG_ETH_UP="no" # required for a standard bridge to be configured. #IFNAME[0]="br0" #BRNICS[0]="eth0" -#BROPTS[0]="" +#IFOPTS[0]="" #IPADDR[0]="192.168.0.1" #NETMASK[0]="24" #IPALIASES[0]="" @@ -181,6 +170,11 @@ DEBUG_ETH_UP="no" # Some examples of additional network parameters that you can use. #IFNAME[4]="wlan0" # Use a different interface name instead of # the default 'eth4' +#IFOPTS[4]="" # A pipe (|) delimited list of interface type + # specific options to apply. These options + # can be found in the ip-link(8) man page in + # the approprite section for the interface + # type being configured. #IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given # with a /<prefix> after the IP address - if # not supplied, /24 will be used as default. @@ -224,3 +218,14 @@ DEBUG_ETH_UP="no" #WLAN_WPAWAIT[4]=30 # In case it takes long for the WPA association # to finish, you can increase the wait time # (defaults to 10 seconds) + +# ============================================================================= + +# Change this to "yes" for debugging output to syslog (if available, stdout if +# not). +DEBUG_ETH_UP="no" + +# MAXNICS is the maximum number of interfaces that will be configured. +# You may need to increase the MAXNICS value if you have many interfaces, or +# you use multiple VLANs and/or bridges. The default is 6. +#MAXNICS="6" |