diff options
Diffstat (limited to 'netconfig')
| -rw-r--r-- | netconfig | 10 |
1 files changed, 6 insertions, 4 deletions
@@ -118,7 +118,8 @@ GATEWAY6="$GATEWAY6" # degradation. In 'active-backup' mode, the 'primary' option should also be # supplied. When using '802.3ad' mode, set "lacp_rate fast" for faster # recovery from an interface failure. In other modes, the 'xmit_hash_policy' -# should be set. +# should be set. See the /usr/src/linux/Documentation/networking/bonding.txt +# file (search for "Bonding Driver Options") for the full set of options. #IFNAME[0]="bond0" #BONDNICS[0]="eth0 eth1" #BONDMODE[0]="balance-rr" @@ -220,9 +221,10 @@ GATEWAY6="$GATEWAY6" # Some examples of additional network parameters that you can use. #IFNAME[4]="wlan0" # Use a different interface name instead of # the default 'eth4' -#IPALIASES[4]="192.168.5.10/24" # Set up an IP alias. A netmask may be given - # with a /<prefix> after the IP address - if - # not supplied, /24 will be used as default. +#IPALIASES[4]="192.168.5.10/24" # A space delimited list of CIDR formatted IP + # aliases to assign to the interface after it + # has come up. If no /<prefix> is given after + # the IP address, /24 will be used as default. #HWADDR[4]="00:01:23:45:67:89" # Overrule the card's hardware MAC address #MTU[4]="" # The default MTU is 1500, but you might need # 1360 when you use NAT'ed IPSec traffic. |