diff options
Diffstat (limited to 'rc.inet1.conf')
| -rw-r--r-- | rc.inet1.conf | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/rc.inet1.conf b/rc.inet1.conf index 5969655..adf6e8d 100644 --- a/rc.inet1.conf +++ b/rc.inet1.conf @@ -71,14 +71,15 @@ GATEWAY6="" # Example of how to configure a bond (link aggrigation) interface. # Note the addition of the BONDNICS and BONDMODE parameters. # BONDNICS is a space delimited list of interfaces to add to this bond. The -# interfaces will be brought up and configured while bringing up the interface, -# so do not need to be previously defined in rc.inet1.conf. +# BONDNICS interfaces will be brought up and configured while bringing up the +# bond interface, so do not need to be previously defined in rc.inet1.conf. # BONDMODE sets the bonding mode for this interface. If not specified when # BONDNICS has been used, the default is 'balance-rr'. -# The IFOPTS[x] option should always include the 'miimon' option when +# IFOPTS is a pipe (|) delimited list of VLAN module specific settings to be +# applied to the interface, and should always include the 'miimon' option when # configuring bonding - not using this option will result in network # degradation. In 'active-backup' mode, the 'primary' option should also be -# supplied. When using '802.3ad mode', set "lacp_rate fast" for faster +# supplied. When using '802.3ad' mode, set "lacp_rate fast" for faster # recovery from an interface failure. In other modes, the 'xmit_hash_policy' # should be set. #IFNAME[0]="bond0" |