From 4a21ea93e6e12ce8a1aa3923e1c397d744528fe8 Mon Sep 17 00:00:00 2001 From: Darren 'Tadgy' Austin Date: Sun, 17 Nov 2019 18:08:51 +0000 Subject: Update text in rc.inet1.conf (and netconfig). --- netconfig | 9 +++++---- rc.inet1.conf | 9 +++++---- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/netconfig b/netconfig index 69aae44..533f9f4 100644 --- a/netconfig +++ b/netconfig @@ -95,14 +95,15 @@ GATEWAY6="" # Example of how to configure a bond (link aggrigation) interface. # Note the addition of the BONDNICS and BONDMODE parameters. # BONDNICS is a space delimited list of interfaces to add to this bond. The -# interfaces will be brought up and configured while bringing up the interface, -# so do not need to be previously defined in rc.inet1.conf. +# BONDNICS interfaces will be brought up and configured while bringing up the +# bond interface, so do not need to be previously defined in rc.inet1.conf. # BONDMODE sets the bonding mode for this interface. If not specified when # BONDNICS has been used, the default is 'balance-rr'. -# The IFOPTS[x] option should always include the 'miimon' option when +# IFOPTS is a pipe (|) delimited list of VLAN module specific settings to be +# applied to the interface, and should always include the 'miimon' option when # configuring bonding - not using this option will result in network # degradation. In 'active-backup' mode, the 'primary' option should also be -# supplied. When using '802.3ad mode', set "lacp_rate fast" for faster +# supplied. When using '802.3ad' mode, set "lacp_rate fast" for faster # recovery from an interface failure. In other modes, the 'xmit_hash_policy' # should be set. #IFNAME[0]="bond0" diff --git a/rc.inet1.conf b/rc.inet1.conf index 5969655..adf6e8d 100644 --- a/rc.inet1.conf +++ b/rc.inet1.conf @@ -71,14 +71,15 @@ GATEWAY6="" # Example of how to configure a bond (link aggrigation) interface. # Note the addition of the BONDNICS and BONDMODE parameters. # BONDNICS is a space delimited list of interfaces to add to this bond. The -# interfaces will be brought up and configured while bringing up the interface, -# so do not need to be previously defined in rc.inet1.conf. +# BONDNICS interfaces will be brought up and configured while bringing up the +# bond interface, so do not need to be previously defined in rc.inet1.conf. # BONDMODE sets the bonding mode for this interface. If not specified when # BONDNICS has been used, the default is 'balance-rr'. -# The IFOPTS[x] option should always include the 'miimon' option when +# IFOPTS is a pipe (|) delimited list of VLAN module specific settings to be +# applied to the interface, and should always include the 'miimon' option when # configuring bonding - not using this option will result in network # degradation. In 'active-backup' mode, the 'primary' option should also be -# supplied. When using '802.3ad mode', set "lacp_rate fast" for faster +# supplied. When using '802.3ad' mode, set "lacp_rate fast" for faster # recovery from an interface failure. In other modes, the 'xmit_hash_policy' # should be set. #IFNAME[0]="bond0" -- cgit v1.2.3