From 8e3bacf5fe7afc125d57807858d562e05927a714 Mon Sep 17 00:00:00 2001 From: "Patrick J. Volkerding" Date: Thu, 24 May 2018 01:22:56 -0500 Subject: netconfig: formatting tweaks plus fixup NM default usage Signed-off-by: Robby Workman --- netconfig | 53 +++++++++++++++++++++++++++++------------------------ 1 file changed, 29 insertions(+), 24 deletions(-) (limited to 'netconfig') diff --git a/netconfig b/netconfig index 3d9bf1d..8e4abf5 100644 --- a/netconfig +++ b/netconfig @@ -11,7 +11,7 @@ write_config_files() { # # If we're doing loopback, we don't want 127.0.0.1 and 255.255.255.0 in -# rc.inet1.conf... it's better to leave the values null. However, since +# rc.inet1.conf... it's better to leave the values null. However, since # we use the IP in other places, we need to make a copy for here. RCIPCOPY=$IPADDR RCMASKCOPY=$NETMASK @@ -68,7 +68,7 @@ DHCP_HOSTNAME[3]="" # Default gateway IP address: GATEWAY="$GATEWAY" -# Change this to "yes" for debugging output to stdout. Unfortunately, +# Change this to "yes" for debugging output to stdout. Unfortunately, # /sbin/hotplug seems to disable stdout so you'll only see debugging output # when rc.inet1 is called directly. DEBUG_ETH_UP="no" @@ -103,8 +103,8 @@ DEBUG_ETH_UP="no" #VIRTIFUSER[1]="someuser" #VIRTIFGROUP[1]="somegroup" -## Example config information for wlan0. Uncomment the lines you need and fill -## in your data. (You may not need all of these for your wireless network) +## Example config information for wlan0. Uncomment the lines you need and fill +## in your data. (You may not need all of these for your wireless network) #IFNAME[4]="wlan0" #IPADDR[4]="" #NETMASK[4]="" @@ -173,7 +173,7 @@ ENDFILE /bin/cat <$ETCNETWORKS # # networks This file describes a number of netname-to-address -# mappings for the TCP/IP subsystem. It is mostly +# mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # @@ -192,14 +192,14 @@ chmod 644 $ETCNETWORKS /bin/cat << EOF > $HOSTS # # hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly +# mappings for the TCP/IP subsystem. It is mostly # used at boot time, when no name servers are running. # On small systems, this file can be used instead of a # "named" name server. Just add the names, addresses # and any aliases to this file... # # By the way, Arnt Gulbrandsen says that 127.0.0.1 -# should NEVER be named with the name of the machine. It causes problems +# should NEVER be named with the name of the machine. It causes problems # for some (stupid) programs, irc and reputedly talk. :^) # @@ -362,16 +362,21 @@ done # Write the hostname with domain to /etc/HOSTNAME: echo $HOSTNM.$DOMAIN > etc/HOSTNAME +## OBSOLETE with recent NetworkManager: +## Also make sure the hostname is written to /etc/NetworkManager/NetworkManager.conf: +#if [ -w etc/NetworkManager/NetworkManager.conf ]; then +# sed -i "s/^hostname=.*$/hostname=$HOSTNM/g" etc/NetworkManager/NetworkManager.conf +#fi dialog --title "CONFIGURATION TYPE FOR '$HOSTNM.$DOMAIN'" \ ---default-item DHCP \ +--default-item NetworkManager \ --menu \ "Now we need to know how your machine connects to the network.\n\ If you have an internal network card and an assigned IP address, gateway, \ -and DNS, use the 'static IP' choice to enter these values. If your IP \ +and DNS, use the 'static IP' choice to enter these values. If your IP \ address is assigned by a DHCP server (commonly used by cable modem and DSL \ -services), select 'DHCP'. If you do not have a network card, select \ -the 'loopback' choice. You may also select 'NetworkManager' if you would \ +services), select 'DHCP'. If you do not have a network card, select \ +the 'loopback' choice. You may also select 'NetworkManager' if you would \ like to have the NetworkManager daemon automatically handle your wired and \ wireless network interfaces (this is simple and usually works). \ Which type of network setup would you like?" 20 70 4 \ @@ -389,10 +394,10 @@ rm -f $TMP/reply if [ "$REPLY" = "DHCP" ]; then USE_DHCP="yes" dialog --title "SET DHCP HOSTNAME" --inputbox "Some network providers require \ -that the DHCP hostname be set in order to connect. If so, they'll have assigned \ +that the DHCP hostname be set in order to connect. If so, they'll have assigned \ a hostname to your machine, which may look something like CC-NUMBER-A (this \ -depends on your ISP). If you were assigned a DHCP hostname, please enter it \ -below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \ +depends on your ISP). If you were assigned a DHCP hostname, please enter it \ +below. If you do not have a DHCP hostname, just hit ENTER or Cancel." 13 62 \ 2> $TMP/SeTDHCPHOST NEW_DHCPHOST="`cat $TMP/SeTDHCPHOST`" rm -f $TMP/SeTDHCPHOST @@ -442,7 +447,7 @@ EOF NETMASK=`cat $TMP/SeTnetmask` fi cat << EOF > $TMP/tempmsg -Enter your netmask. This will generally look something +Enter your netmask. This will generally look something like this: 255.255.255.0 Enter netmask (aaa.bbb.ccc.ddd): EOF @@ -556,8 +561,8 @@ if [ -d lib/modules/`uname -r` \ dialog --title "PROBE FOR NETWORK CARD?" --menu "If you like, we \ can look to see what kind of network card you have in your machine, and \ if we find one create an /etc/rc.d/rc.netdevice script to load the module \ -for it at boot time. There's a slight bit of danger that the probing \ -can cause problems, but it almost always works. If you'd rather configure \ +for it at boot time. There's a slight bit of danger that the probing \ +can cause problems, but it almost always works. If you'd rather configure \ your system manually, you can skip the probing process and edit \ /etc/rc.d/rc.modules or /etc/modules.conf later to have it load the right module." \ 16 68 2 \ @@ -601,7 +606,7 @@ the $card.o module has been detected." 5 72 fi if [ ! -r /cardfound ]; then dialog --title "NO CARD DETECTED" --msgbox "Sorry, but no network \ -card could be probed for on your system. Some cards (like non-PCI NE2000s) \ +card could be probed for on your system. Some cards (like non-PCI NE2000s) \ must be supplied with the I/O address to use and can't be probed for safely. \ You'll have to try to configure the card later by editing \ /etc/rc.d/rc.modules or recompiling your kernel." 9 70 @@ -621,11 +626,11 @@ Is this correct? Press 'Yes' to continue, or 'No' to reconfigure." 0 0 elif [ "$LOOPBACK" = "yes" -a "$NETWORKMANAGER" = "yes" ]; then dialog --title "NETWORK SETUP COMPLETE" --yesno "Your networking \ system is now configured to use NetworkManager for -wired and wireless network management. To set up wireless networks +wired and wireless network management. To set up wireless networks and view status, add the Network Management control panel widget to your KDE desktop. -Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0 +Is this correct? Press 'Yes' to confirm, or 'No' to reconfigure." 0 0 RETVAL=$? elif [ "$USE_DHCP" = "" ]; then while [ 0 ]; do @@ -634,8 +639,8 @@ elif [ "$USE_DHCP" = "" ]; then --extra-label Edit \ --cancel-label Restart \ --inputmenu \ -"These are the settings you have entered. To accept them and complete \ -the networking setup, press enter. If you need to make any changes, you \ +"These are the settings you have entered. To accept them and complete \ +the networking setup, press enter. If you need to make any changes, you \ can do that now (or reconfigure later using 'netconfig')." \ 22 60 12 \ "Hostname:" "$HOSTNM" \ @@ -692,11 +697,11 @@ if [ "$RETVAL" = "0" ]; then chmod 755 etc/rc.d/rc.networkmanager fi if [ "$1" = "" ]; then - dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40 + dialog --msgbox "Settings accepted. Basic network configuration is complete." 6 40 fi else if [ "$1" = "" ]; then - dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60 + dialog --msgbox "Settings discarded. Run the 'netconfig' command again if you need to reconfigure your network settings." 6 60 fi fi -- cgit v1.2.3