From 74a3127d8b2c7fdfb7692334acf3ce6594e5a508 Mon Sep 17 00:00:00 2001 From: Darren 'Tadgy' Austin Date: Thu, 14 Nov 2019 06:18:24 +0000 Subject: Update documentation. Default BONDMODE to balance-rr. Update rc.inet1.conf. --- rc.inet1.conf | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'rc.inet1.conf') diff --git a/rc.inet1.conf b/rc.inet1.conf index 8ac6c8d..af8a091 100644 --- a/rc.inet1.conf +++ b/rc.inet1.conf @@ -69,7 +69,18 @@ GATEWAY6="" # ============================================================================= # Example of how to configure a bond (link aggrigation) interface. - +# Note the addition of the BONDNICS and BONDMODE parameters. +# BONDNICS is a space delimited list of interfaces to add to this bond. The +# interfaces will be brought up and configured while bringing up the interface, +# so do not need to be previously defined in rc.inet1.conf. +# BONDMODE sets the bonding mode for this interface. If not specified when +# BONDNICS has been used, the default is 'balance-rr'. +# The IFOPTS[x] option should always include the 'miimon' option when +# configuring bonding - not using this option will result in network +# degradation. In 'active-backup' mode, the 'primary' option should also be +# supplied. When using '802.3ad mode', set "lacp_rate fast" for faster +# recovery from an interface failure. In other modes, the 'xmit_hash_policy' +# should be set. #IFNAME[0]="bond0" #BONDNICS[0]="eth0 eth1" #BONDMODE[0]="balance-rr" -- cgit v1.2.3