From 2b563b7a34b1d00d7162983ff13c12867cc62c2e Mon Sep 17 00:00:00 2001 From: Robby Workman Date: Fri, 6 Jan 2017 15:27:27 -0600 Subject: Initial commit of rc.inet1* and rc.wireless* If other files are needed, they can be added later --- rc.wireless.conf | 225 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 rc.wireless.conf (limited to 'rc.wireless.conf') diff --git a/rc.wireless.conf b/rc.wireless.conf new file mode 100644 index 0000000..d02d7c2 --- /dev/null +++ b/rc.wireless.conf @@ -0,0 +1,225 @@ +# Wireless LAN adapter configuration +# +# Theory of operation : +# +# The script attempts to match a block of settings to the specific wireless +# card inserted, the *first* block matching the card is used. +# The address format is "hwaddr", with * as a wildcard. +# 'hwaddr' is the unique MAC address identifier of the wireless card. +# The MAC address is usually printed on the card, or can be found via ifconfig. +# Some examples here use only half of the MAC address with a wildcard to +# match a whole family of cards... +# +# All the Wireless specific configuration is done through the Wireless +# Extensions, so we will just call 'iwconfig' with the right parameters +# defined below. +# Of course, you need to have iwconfig installled on your system. +# To download iwconfig, or for more info on Wireless Extensions : +# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html +# +# Note : you don't need to fill all parameters, leave them blank, in most +# cases the driver will initialise itself with sane defaults values or +# automatically figure out the value... And no drivers do support all +# possible settings... +# +# -- This is a modified '/etc/pcmcia/wireless.opts' script -- +# -- I added sections for Prism/GT and Atheros based cards -- +# -- (supported by the prism54 and madwifi drivers) -- +# -- 16/sep/2004 * Eric Hameleers -- +# + +VERBOSE=1 + +case "$HWADDR" in + +## NOTE : Comment out the following five lines to activate the samples below ... +## --------- START SECTION TO REMOVE ----------- +## Pick up any Access Point, should work on most 802.11 cards +*) + INFO="Any ESSID" + ESSID="any" + ;; +## ---------- END SECTION TO REMOVE ------------ + + +# Here are a few examples with a few Wireless LANs supported... +# The matching is done on the first 3 bytes of the MAC address + +# SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter +00:04:E2:*) + INFO="SMC2835W EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Adapter" + # ESSID (extended network name) : My Network, any + ESSID="any" + # NWID/Domain (cell identifier) : 89AB, 100, off + NWID="" + # Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto + MODE="Managed" + # Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency) + FREQ="" + CHANNEL="7" + # Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm) + SENS="" + # Bit rate : auto, 1M, 11M,54M + RATE="auto" + # Encryption key : 4567-89AB-CD, s:password + # Example for 40-bit encryption: + #KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]" + # Example for 104-bit encryption (aka 128-bit WEP): + #KEY="d5ad2f05abd048ecf10b1c80c7" + KEY="" + # RTS threshold : off, 500 + RTS="" + # Fragmentation threshold : off, 1000 + FRAG="" + # Other iwconfig parameters : power off, ap 01:23:45:67:89:AB + IWCONFIG="" + # iwspy parameters : + 01:23:45:67:89:AB + IWSPY="" + # iwpriv parameters : set_port 2, set_histo 50 60 + IWPRIV="" +;; + +# Multiband Atheros based 802.11a/b/g universal NIC cards +00:05:4E:*) + INFO="Multiband Atheros based 802.11a/b/g universal NIC" + # ESSID (extended network name) : My Network, any + ESSID="" + # Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto + MODE="Managed" + # Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency) + FREQ="" + CHANNEL="7" + # Bit rate : auto, 1M, 11M,54M + RATE="auto" + # Encryption key : 4567-89AB-CD, s:password + # Example for 40-bit encryption: + #KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]" + # Example for 104-bit encryption (aka 128-bit WEP): + #KEY="d5ad2f05abd048ecf10b1c80c7" + KEY="" + # Other iwconfig parameters : power off, ap 01:23:45:67:89:AB + IWCONFIG="" + # iwspy parameters : + 01:23:45:67:89:AB + IWSPY="" + # iwpriv parameters : set_port 2, set_histo 50 60 + IWPRIV="" + ;; + +# Lucent Wavelan IEEE (+ Orinoco, RoamAbout and ELSA) +# Note : wvlan_cs driver only, and version 1.0.4+ for encryption support +00:60:1D:*|00:02:2D:*) + INFO="Wavelan IEEE example (Lucent default settings)" + ESSID="Wavelan Network" + MODE="Managed" + #RATE="auto" + KEY="s:secu1" + # To set all four keys, use : + #KEY="s:secu1 [1] key s:secu2 [2] key s:secu3 [3] key s:secu4 [4] key [1]" + # For the RG 1000 Residential Gateway: The ESSID is the identifier on + # the unit, and the default key is the last 5 digits of the same. + #ESSID="084d70" + #KEY="s:84d70" + ;; + +# Cisco/Aironet 4800/3x0 +# Note : MPL driver only (airo/airo_cs), version 1.3 or later +00:40:96:*|00:02:8A:*) + INFO="Cisco/Aironet example (Cisco default settings)" + ESSID="any" + # To set all four ESSID, use iwconfig v21 and the same trick as above + MODE="Managed" + #RATE="11M auto" + #KEY="d5ad2f05abd048ecf10b1c80c7" + KEY="off" + ;; + +# Samsung MagicLan (+ some other PrismII cards) +# Note : Samsung binary library driver, version 1.20 or later +00:00:F0:*|00:02:78:*) + INFO="Samsung MagicLan example (Samsung default settings)" + ESSID="any" + MODE="Managed" + CHANNEL="4" + RATE="auto" + #KEY="883e-aa67-21 [1] key 5501-d0da-87 [2] key 91f5-3368-6b [3] key 2d73-31b7-96 [4]" + #IWCONFIG="power on" + ;; + +# Raytheon Raylink/WebGear Aviator2.4 +# Note : doesn't work yet, please use for debugging only :-( +00:00:8F:*|00:00:F1:*) + INFO="Raylink/Aviator2.4 example (Aviator default ad-hoc setting)" + ESSID="ADHOC_ESSID" + MODE="Ad-Hoc" + RATE="auto" + IWPRIV="set_framing 1" + ;; + +# Old Lucent Wavelan +08:00:0E:*) + INFO="Wavelan example (Lucent default settings)" + NWID="0100" + MODE="Ad-Hoc" + FREQ="2.425G" + KEY="off" + ;; + +# Netwave (Xircom Netwave/Netwave Airsurfer) +00:80:C7:*) + INFO="Netwave example (Netwave default settings)" + NWID="100" + KEY="00" + ;; + +# Proxim RangeLan2/Symphony (what is the MAC address ???) +XX:XX:XX:*) + INFO="Proxim RangeLan2/Symphony example" + NWID="0" + MODE="Master" + CHANNEL="15" + IWPRIV="setsubchan 1" + ;; + +# No Wires Needed Swallow 550 and 1100 setting (what is the MAC address ???) +XX:XX:XX:*) + INFO="NWN Swallow example" + ESSID="session" + KEY="0000-0000-00 open" + ;; + +# Symbol Spectrum24 setting (what is the MAC address ???) +XX:XX:XX:*) + INFO="Symbol Spectrum24 example" + ESSID="Essid string" + ;; + +# Generic example (decribe all possible settings) +*) + INFO="Fill with your own settings..." + # ESSID (extended network name) : My Network, any + ESSID="" + # NWID/Domain (cell identifier) : 89AB, 100, off + NWID="" + # Operation mode : Ad-Hoc, Managed, Master, Repeater, Secondary, auto + MODE="" + # Frequency or channel : 1, 2, 3 (channel) ; 2.422G, 2.46G (frequency) + FREQ="" + CHANNEL="" + # Sensitivity (cell size + roaming speed) : 1, 2, 3 ; -70 (dBm) + SENS="" + # Bit rate : auto, 1M, 11M + RATE="" + # Encryption key : 4567-89AB-CD, s:password + KEY="" + # RTS threshold : off, 500 + RTS="" + # Fragmentation threshold : off, 1000 + FRAG="" + # Other iwconfig parameters : power off, ap 01:23:45:67:89:AB + IWCONFIG="" + # iwspy parameters : + 01:23:45:67:89:AB + IWSPY="" + # iwpriv parameters : set_port 2, set_histo 50 60 + IWPRIV="" + ;; +esac -- cgit v1.2.3