showdiff() {
  BASENAME=$(basename $i .new)
  FILEPATH=$(dirname $i)
  FULLNAME="${FILEPATH}/${BASENAME}"

  if [ -e ${FULLNAME} ]; then
    diff -u ${FULLNAME} ${FULLNAME}.new | $MORECMD
  else
    echo "file $FULLNAME doesn't exist"
  fi
}

showmenu() {
  echo -e "$1 - \c"
  tput sc
  shift
  while [ $# -gt 0 ]; do
    echo -e "$1"
    tput rc
    shift
  done
}

mergenew() {
  BASENAME=$(basename $i .new)
  FILEPATH=$(dirname $i)
  FULLNAME="${FILEPATH}/${BASENAME}"

  if [ -e "${FULLNAME}" ]; then
    # in media res. we do the merging right away, but we later allow
    # the user to redo it, if not satisfied with the results.
    rm -f "${FULLNAME}.smerge"
    echo "Enter '?' in the prompt (%) to display help."
    cp -p "${FULLNAME}.new" "${FULLNAME}.smerge" # <- this is so that the
    # installed merged file will have the same permissions as the .new file
    sdiff -s -o "${FULLNAME}.smerge" "${FULLNAME}" "${FULLNAME}.new"

    GOEXM=0
    while [ $GOEXM -eq 0 ]; do
      showmenu $i "(E)dit the merged file" "(I)nstall the merged file" "View a diff between the merged and the (N)ew file" "View a diff between the (O)ld and the merged file" "(R)edo the merge" "(V)iew the merged file" "(B)ack to previous menu, and delete the merged file"
      read ANSWER
      case "$ANSWER" in
        E|e)
          if [ -f "${FULLNAME}.smerge" ]; then
            $EDITCMD "${FULLNAME}.smerge"
          else
            echo -e "Nothing was merged yet..."
          fi
        ;;
        I|i)
          if [ -f "${FULLNAME}.smerge" ]; then
            if [ -e "${FULLNAME}" ] && [ "$ORIG_BACKUPS" != "off" ]; then
              mv "${FULLNAME}" "${FULLNAME}.orig"
            fi
            mv "${FULLNAME}.smerge" "${FULLNAME}"
            rm -f "${FULLNAME}.new"
            GOEXM=1
            GOEX=1
          else
            echo -e "Nothing was merged yet..."
          fi
        ;;
        N|n)
          if [ -f "${FULLNAME}.smerge" ]; then
            diff -u "${FULLNAME}.smerge" "${FULLNAME}.new" | $MORECMD
          else
            echo -e "Nothing was merged yet..."
          fi
        ;;
        O|o)
          if [ -f "${FULLNAME}.smerge" ]; then
            diff -u "${FULLNAME}" "${FULLNAME}.smerge" | $MORECMD
          else
            echo -e "Nothing was merged yet..."
          fi
        ;;
        R|r)
          rm -f "${FULLNAME}.smerge"
          echo "Enter '?' in the prompt (%) to display help."
          cp -p "${FULLNAME}.new" "${FULLNAME}.smerge" # <- this is so that
          # the installed merged file will have the same permissions as the
          # .new file
          sdiff -s -o "${FULLNAME}.smerge" "${FULLNAME}" "${FULLNAME}.new"
        ;;
        V|v)
          if [ -f "${FULLNAME}.smerge" ]; then
            $MORECMD "${FULLNAME}.smerge"
          else
            echo -e "Nothing was merged yet..."
          fi
        ;;
        B|b)
          rm -f "${FULLNAME}.smerge"
          GOEXM=1
        ;;
      esac
    done
  else
    echo "file $FULLNAME doesn't exist"
  fi
}

overold() {
  BASENAME=$(basename $i .new)
  FILEPATH=$(dirname $i)
  FULLNAME="${FILEPATH}/${BASENAME}"

  if [ -e ${FULLNAME} ] && [ "$ORIG_BACKUPS" != "off" ]; then
      mv ${FULLNAME} ${FULLNAME}.orig
  fi
  mv ${FULLNAME}.new ${FULLNAME}
}

removeold() {
  rm $i
}

runvimdiff() {
  BASENAME=$(basename $i .new)
  FILEPATH=$(dirname $i)
  FULLNAME="${FILEPATH}/${BASENAME}"

  if [ -e ${FULLNAME} ]; then
    vimdiff ${FULLNAME} ${FULLNAME}.new
  else
    echo "file $FULLNAME doesn't exist"
  fi
}

looknew() {
  local ROWS SIZE FILES PROMPTTEXT TEXTLINES MAXROWS
  local newcount f n fn
  f=0
  n=0

  # with ONLY_NEW_DOTNEW set, slackpkg will search only for
  # .new files installed in actual slackpkg's execution
  if [ "$ONLY_NEW_DOTNEW" = "on" ]; then
    ONLY_NEW_DOTNEW="-cnewer $TMPDIR/timestamp"
  else
    ONLY_NEW_DOTNEW=""
  fi

  printf "%s\n" "Searching for NEW configuration files..."

  FILES=$( find \
    ${ROOT}/etc \
    ${ROOT}/var/yp \
    ${ROOT}/usr/share/vim \
    -name "*.new" \
    ${ONLY_NEW_DOTNEW} \
    -not -name "rc.inet1.conf.new" \
    -not -name "group.new" \
    -not -name "passwd.new" \
    -not -name "shadow.new" \
    -not -name "gshadow.new" 2>/dev/null |
    sort -V 2>/dev/null )

  if [ -n "$FILES" ]; then
    newcount=$( echo "$FILES" | wc -l )
    SIZE=$( stty size )
    ROWS=${SIZE% *}

    # Set here so we can count the No. of lines
    PROMPTTEXT="
What do you want (K/O/R/P)?

  (K)eep the old files and consider .new files later

  (O)verwrite all old files with the new ones"

    [ "$ORIG_BACKUPS" != "off" ] && PROMPTTEXT+=". The
     old files will be stored with the suffix .orig"

    PROMPTTEXT+="\n
  (R)emove all .new files

  (P)rompt K, O, R selection for every single file\n"

    printf "%s %s\n\n" "Some packages had new configuration" \
      "files installed ($newcount new files):"

    # No. of prompt etc. lines to print.
    TEXTLINES=$(( $( printf %b "$PROMPTTEXT" | wc -l ) + 3 ))

    if [ $(( newcount + TEXTLINES )) -lt $ROWS ]; then
      # All files will fit on screen.
      printf "%s\n" "$FILES"
    else
      # Won't all fit, so scroll a screenfull at a time.
      # No. of lines minus 'Searching for' + 'Press SPACE...'
      MAXROWS=$(( ROWS - 5 ))

      for fn in $FILES; do
        junk=" "
        f=$(( f + 1 ))
        n=$(( n + 1 ))
        echo "$fn"

        # Stop printing at bottom of screen
        if [ $f -ge $MAXROWS ]; then

          # No. of lines minus 'Press SPACE...'
          MAXROWS=$(( ROWS - 2 ))
          f=0
          IFS=$( printf "\n" ) read -rn 1 -p "
  Press SPACE for more, ENTER to skip" junk

          # Enter pressed
          if [ -z "$junk" ]; then
            tput -S <<EOF
            cuu 1
            el 2
            cuu 1
            el 2
EOF
            break
          else
            # Space pressed
            printf "\n"
            tput -S <<EOF
            cuu 1
            el 2
            cuu 1
            el 2
EOF
          fi
        fi
      done

      # Final prompt to stop list scrolling off the top
      if [ ! -z "$junk" ] && [ $f -ne 0 ]; then
        IFS=$( printf "\n" ) read -rn 1 -p "
  Press any key to continue" junk
        printf "\n"
        tput -S <<EOF
        cuu 1
        el 2
        cuu 1
        el 2
EOF
      fi
    fi

    printf %b "$PROMPTTEXT"
    answer
    case $ANSWER in
      K|k)
      ;;
      O|o)
        for i in $FILES; do
          overold $i
        done
      ;;
      R|r)
        for i in $FILES; do
          removeold $i
        done
      ;;
      P|p)
        echo "Select what you want file-by-file"
        for i in $FILES; do
          GOEX=0
          while [ $GOEX -eq 0 ]; do
            echo
            showmenu $i \
              "(K)eep" "(O)verwrite" "(R)emove" "(D)iff" "(M)erge" "(V)imdiff"
            read ANSWER
            case $ANSWER in
              O|o)
                overold $i
                GOEX=1
              ;;
              R|r)
                removeold $i
                GOEX=1
              ;;
              D|d)
                showdiff $1
              ;;
              M|m)
                mergenew $1
              ;;
              V|v)
                runvimdiff $1
              ;;
              K|k|*)
                GOEX=1
              ;;
            esac
          done
        done
      ;;
      *)
        echo "\
OK! Your choice is nothing! slackpkg will Keep the old files
for you to deal with later"
      ;;
    esac
  else
    echo -e "\t\tNo .new files found."
  fi
}

lookkernel() {
  NEWKERNELMD5=$(md5sum /boot/vmlinuz 2>/dev/null)
  if [ "$KERNELMD5" != "$NEWKERNELMD5" ]; then
    if [ -x /sbin/lilo ] && [ -r /etc/lilo.conf ] && grep -q initrd /etc/lilo.conf ; then
      echo -e "\n
Your kernel image was updated, and your /etc/lilo.conf indicates
the use of an initrd for at least one of your kernels. Be sure to
regenerate the initrd for the new kernel and handle any needed
updates to your bootloader.
"
    elif [ -x /sbin/lilo ] && [ -r /etc/lilo.conf ] ; then
      echo -e "\n
Your kernel image was updated.  Be sure to handle any needed updates
to your bootloader (possibly as simple as running /sbin/lilo).
"
    else
      echo -e "\n
Your kernel image was updated, and lilo does not appear to be used on
your system.  You may need to adjust your boot manager (like GRUB) to
boot the appropriate kernel (after generating an initrd if required)."
    fi
    echo -e "Press the \"Enter\" key to continue...\n "
    read _junk
  fi
}