In rc.inet1.conf, be consistant with spacing and commenting.

1 files changed, 45 insertions, 46 deletions

diff --git a/rc.inet1.conf b/rc.inet1.conf
index aba374c..cdb66ba 100644
--- a/rc.inet1.conf
+++ b/rc.inet1.conf
@@ -1,19 +1,19 @@
 # /etc/rc.d/rc.inet1.conf
 #
 # This file contains the configuration settings for network interfaces.
-
+#
 # If USE_DHCP[interface] is set to "yes", this overrides any other settings.
 # If you don't have an interface, leave the settings null ("").
-
+#
 # You can configure network interfaces other than eth0,eth1... by setting
 # IFNAME[interface] to the interface's name. If IFNAME[interface] is unset
 # or empty, it is assumed you're configuring eth<interface>.
-
-# Several other parameters are available, the end of this file contains a
+#
+# Several other parameters are available; the end of this file contains a
 # comprehensive set of examples.
-
+#
 # Important note for IPv6 stateless auto configuration (SLAAC) users:
-# From Slackware 15.0 onwards, you need to set USE_SLAAC[0]="yes" (etc) below
+# From Slackware 15.0 onwards, you need to set USE_SLAAC[0]="yes" below.
 
 # =============================================================================
 
@@ -68,51 +68,51 @@ GATEWAY6=""
 
 # =============================================================================
 
-# Change this to "yes" for debugging output to stdout.
+# Change this to "yes" for debugging output to syslog (if available, stdout if
+# not).
 DEBUG_ETH_UP="no"
 
 # MAXNICS is the maximum number of interfaces that will be configured.
 # You may need to increase the MAXNICS value if you have many interfaces, or
 # you use multiple VLANs and/or bridges.  The default is 6.
-# MAXNICS="6"
+#MAXNICS="6"
 
 # =============================================================================
 
 # Example of how to configure a bond (link aggrigation) interface.
 
-# IFNAME[0]="bond0"
-# BONDNICS[0]="eth0 eth1"
-# BONDMODE[0]="balance-rr"
-# BONDOPTS[0]="xmit_hash_policy layer2+3 | miimon 100"
-# IPADDR[0]="192.168.0.1"
-# NETMASK[0]="24"
-# IPALIASES[0]=""
-# USE_DHCP[0]=""
-# DHCP_HOSTNAME[0]=""
-# IP6ADDRS[0]=""
-# USE_SLAAC[0]=""
-# USE_DHCP6[0]=""
+#IFNAME[0]="bond0"
+#BONDNICS[0]="eth0 eth1"
+#BONDMODE[0]="balance-rr"
+#BONDOPTS[0]="xmit_hash_policy layer2+3 | miimon 100"
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+#IP6ADDRS[0]=""
+#USE_SLAAC[0]=""
+#USE_DHCP6[0]=""
 
 # =============================================================================
 
-# Example of how to configure a VLAN interface.
+# Example of how to configure a VLAN interface:
 # The VLAN ID is taken from the full interface name, which is comprised of the
 # underlying interface name, a period (.) and then the VLAN ID.
 # VLANOPTS is a pipe (|) delimited list of VLAN module specific settings to be
 # applied to the interface.  See the ip-link(8) man page (search for "VLAN Type
 # Support") for details of the options available.  This option is not required
 # for a standard VLAN to be configured.
-#
-# IFNAME[0]="eth0.10"
-# VLANOPTS[0]=""
-# IPADDR[0]="192.168.10.1"
-# NETMASK[0]="24"
-# IPALIASES[0]=""
-# USE_DHCP[0]=""
-# DHCP_HOSTNAME[0]=""
-# IP6ADDRS[0]=""
-# USE_SLAAC[0]=""
-# USE_DHCP6[0]=""
+#IFNAME[0]="eth0.10"
+#VLANOPTS[0]=""
+#IPADDR[0]="192.168.10.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
+#IP6ADDRS[0]=""
+#USE_SLAAC[0]=""
+#USE_DHCP6[0]=""
 
 # =============================================================================
 
@@ -123,14 +123,14 @@ DEBUG_ETH_UP="no"
 # applied to the interface.  See the ip-link(8) man page (search for "BRIDGE
 # Type Support") for details of the options available.  This option is not
 # required for a standard bridge to be configured.
-# IFNAME[0]="br0"
-# BRNICS[0]="eth0"
-# BROPTS[0]=""
-# IPADDR[0]="192.168.0.1"
-# NETMASK[0]="24"
-# IPALIASES[0]=""
-# USE_DHCP[0]=""
-# DHCP_HOSTNAME[0]=""
+#IFNAME[0]="br0"
+#BRNICS[0]="eth0"
+#BROPTS[0]=""
+#IPADDR[0]="192.168.0.1"
+#NETMASK[0]="24"
+#IPALIASES[0]=""
+#USE_DHCP[0]=""
+#DHCP_HOSTNAME[0]=""
 
 # =============================================================================
 
@@ -140,13 +140,12 @@ DEBUG_ETH_UP="no"
 # adjust VIRTIFNAME and VIRTIFTYPE accordingly.
 # Starting with VIRTIFNAME[0] is mandatory, and each next one must be
 # incremented by one, so VIRTIFNAME[1], VIRTIFNAME[2], and so on.
-#
 # Virtual tap interface example
 #VIRTIFNAME[0]="tap0"
 #VIRTIFTYPE[0]="tap"
 #VIRTIFUSER[0]="root"
 #VIRTIFGROUP[0]="root"
-#
+
 # Virtual tun interface example
 #VIRTIFNAME[1]="tun0"
 #VIRTIFTYPE[1]="tun"
@@ -155,8 +154,9 @@ DEBUG_ETH_UP="no"
 
 # =============================================================================
 
-## Example config information for wlan0.  Uncomment the lines you need and fill
-## in your data.  (You may not need all of these for your wireless network)
+# Example config information for wlan0:
+# Uncomment the lines you need and fill in your data.  You may not need all of
+# these for your wireless network.
 #IFNAME[4]="wlan0"
 #IPADDR[4]=""
 #NETMASK[4]=""
@@ -178,8 +178,7 @@ DEBUG_ETH_UP="no"
 
 # =============================================================================
 
-## Some examples of additional network parameters that you can use.
-## Config information for wlan0:
+# Some examples of additional network parameters that you can use.
 #IFNAME[4]="wlan0"              # Use a different interface name instead of
                                 # the default 'eth4'
 #IPALIASES[4]="192.168.5.10/24" # Set up an IP alias.  A netmask may be given